| PINK tv active
Application_________________________
 VIDEO
BROADCAST
RECORDING
PROJECT STUDIO
Arrangement/Configurations___________
STEREO
SURROUND
ADVANCED SURROUND™
MODUMO™
Features___________________________
 2 identical 80W amplifier
 eliminates time related
distortion
molded waveguide baffel
Lower X-Over FC
Exponential coupling (Tweeter/Air)
eliminates reflections,
minimizes distortion
linearize the phase response
wide dispersion pattern
digital "quick delivery" power supply
cycles 2000 times faster
hum canceling
Tight and accurate Low End
HDS Driver
Fiberglas membrane
Vented Coil System
Extrem low compression
Superior transient response
Perfect coil cooling
Level control
Sensitivity adjustable
-40 to + 10dB
Low end control
Corrects Low end from -6 to +4
dB
Room compensation
Corner/Wall placement Eq
High end control
Corrects High end from -4 to +4
dB
Room compensation
Adjustable (Listening taste)
 Download
Product broschure (245kB) engl.
Diagram/Data sheet (637kB) engl.
EMES STUDIO MONITOR SYSTEMS
Josef-Drexler-Str. 8
89331
Burgau
GERMANY
Tel: **49-(0)8222-965954
Fax:
**49-(0)8222-965953 |
|
 Anywhere
were small, true sounding monitor is needed the PINK tv active are just
perfect.Specified for the audio/video industrie, the PINK tv active
meets all the demands for project studios, surround sound and high quality
multimedia applications, as well. It's compact 2 way package (170x290x200mm),
combined with the shielded magnetic field and the excellent stereo imaging,
makes them very handsam to any set up required, even at very close listening
distances.
As always at EMES, matched high quality drivers are chosen,
because to us they are the most critical part in a high quality Studio Monitor
System!
The Low range (68 - 1700Hz) is reproduced by a 14cm Fiberglass
Membrane HDS-driver. This extrem low compression driver is contructed in a way
so the air, normally sealed in the Air gap of the magnet system, now can
circulated. Finally the Air flow is nearly non resistant to the coils movement,
which results in very accuarate membrane excursion. The Impuls response and Low
End precision is realy remarkable for a Monitor this size.
The high frequency
section is molded into the baffel as a radial horn, coupled with a 25mm textile
neodymium tweeter! The radial horn element is constructed in a way which
minimizes distortion (see TDH diagram), allows us to use it down to 1700 Hz,
mechanicaly align the Woofer and Tweeters Coil position and delivers a very
homogenius dispersion pattern, so the higher frequencies are nicely distributed
into the room!
The active version has two identical build in 80W rms
amplifiers which deliver a powerfull and optimized output. We at EMES always use
identical amplifiers, to have the lowest time related distortion
possible.
Different designs or just different wattage cause these time
related distortion. This is not what we are aiming for. This is one of the many
design criterias to the EMES audio performance. To adjust the monitors to your
personal listening taste and room acoustics, we implemented dip-switches for
input level, bass- and high frequency adjustments. All of them have Dip-Switches
to allow precise and identical settings for all related monitors within the
playback system (Stereo/5.1/Advanced Surround™).
We ship all our monitors as matched pairs within a
tolerance less than ±0,5 dB!
     
|
PINK tv active -
System |
|
|
| construction |
2 way
bass-reflex |
| concept |
One & One Monitor with
Wave-guide |
| fc responce free
field |
68 - 20.000 Hz +/- 2
dB |
| fc responce in
wall |
68 - 20.000 Hz +/- 1,5
dB |
| system low fc
responce |
66 Hz - 3
dB |
| max. sensitivity |
108 dB |
| max. sensitivity long
term |
106 dB |
| harmonic distortion at SPL
<100Hz |
0,8 % |
| harmonic distortion at SPL
>100Hz |
0,4 % |
| Bass driver |
1 x 5" fibre
composite |
| Midrange driver |
- |
| Hf driver |
25mm
Neodymium |
| shielded (anti
magnetic) |
yes |
| weight |
5,5 Kg |
| dimensions w/h/d in
mm |
170 x 290 x 200
mm |
| pair difference |
+/- 0,5
dB |
| PINK tv active -
Electronic |
|
| number of
amplifier |
2 |
| power handling rms
Lf/Hf |
2 x 60
W |
| power handling peak
Lf/Hf |
2 x 80 W |
| connector type |
XLR
(female) |
| input impedance |
10
kOhm |
| input sensitivity |
16
steps, from 0,45 - 4,5V |
| X-over fc |
1,500
Hz |
| low pass filter |
35 Hz /
- 18dB |
| Hf level control |
16
steps, from -4 dB - + 4 dB |
| Lf gain control |
16
steps, from -6 dB - + 4 dB |
| distortion at acoustic max.
output |
0,1% |
| signal to noise
ration |
-102
dB |
| kind of power
supply |
digital |
| operating voltage |
115/230
V +/- 20% |
| power consumtion at max.
output |
180
W |
|
|
|
SOLD OUT
