Audio Inputs | 16, balanced line-level, 1/4-inch TRS connector |
---|---|
Inputs | Tip: Audio +; Ring: Audio -; Sleeve: Ground |
TRS Thru | Impedance matched output |
Analog to Digital Conversion | 48kHz sample rate, 24 bit |
Frequency Response | 4Hz-22kHz |
A- Net Output | one Category 5 (RJ45 connector) |
A-Net Expansion | one Category 5 (RJ45 connector) |
Gain Settings | Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu |
Channel LED Indicators | Signal Present and Clip, per channel |
Line Inputs | Impedance: 48k ohms |
Metering | LEDs; green: Signal Present, red: Clip; per channel |
Stereo Operation | Stereo Link, per channel pair; Two-position switch (Normal, Link) |
Maximum Input Level | +22dBu |
Input Impedance | 17.8k ohm |
Freq. Response | 4Hz-22kHz +0.2dB/-3dB |
THD +N | < 0.003% |
Crosstalk | -90dB |
Bit Error Rate (BER) | 10(-12) |
Signal to Noise (unweighted) | 90dB typical, A/D to D/A Measured from AN-16/i to AN-16/o Output Module |
Digital Outputs | A-Net: 1; A-Net Expansion: 1; RJ45 connector |
A-Net Pro16 |
A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; |
Latency | <0.880 msec (measured from analog input to analog output) |
Power Supply Input Voltage Output Voltage Plug Size |
External, DC, universal switching type 100-240 volts, 50/60Hz, 30VA 18-24 VDC, 0.5 amp 2 mm |
Power | 18-24 VDC, 500mA |
Dimensions | 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high |
Weight | 6.8 lbs. (3.08 kg) |
Options | AN-16SBR System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?